DKD1879 Switch-off Electromagnetic Holding Electromagnet, Bidirectional Holding Electromagnet, Bidirectional Telescopic Motion Electromagnet
The specifications and models of retaining electromagnets generally adopt company name+diameter of movable core+length of frame body+working mode+working voltage+serial number.
If our products DKD1879-12V-2
D: Dongguan De'ang Electromagnetic Technology Co., Ltd.
KD: Bidirectional Holding Electromagnet
18: Represents a movable iron core with a diameter of 18 mm.
79: Represents a frame length of 79 mm
S: Represents push structure for products and pull structure for L.
12: Represents working voltage of 12V
The difference between dual-holding electromagnet and common electromagnet:
The working principle of ordinary push-pull electromagnet is to push (or pull back) by electrification and reset after power failure. If it needs a long time to maintain the push-pull state (or pull state), it needs a long time to power on and power off, which has a certain impact on its life. The advantage of ordinary push-pull electromagnet is that it can quickly realize push-pull action (three times a second at the fastest). It is often used in some mechanical structure equipment that needs to realize push-pull action quickly. 。
The principle of one-way holding electromagnet is to add a permanent magnet block at the end of the product of the ordinary push-pull electromagnet. Its working principle is that the power can be cut off immediately when the electromagnet is turned on (or pulled down), but it will still remain at the terminal (just like the ordinary push-pull electromagnet is powered on for a long time, keeping the power on to achieve push-pull state), but it can be cut off immediately after the electromagnet is turned on. Mainly depends on the internal permanent magnet block generated by the retention force in the terminal, when the stroke and force can be maintained. The reset needs reverse power supply, which is mainly used in some mechanical structures that need to be pushed out for a long time.
Dual-holding electromagnet has the same principle as unidirectional-holding electromagnet, except that it is designed with two coils inside, so that it can produce retaining force at both ends, and the stroke and retaining force at both ends are the same.
The biggest difference between the maintenance electromagnet and the ordinary electromagnet is that if the ordinary electromagnet needs a long time to maintain the push-out distance and force, it can only be achieved by a long time of power-on, while the maintenance electromagnet can be switched off immediately after the launch of the power-on, relying on the internal permanent magnet block to maintain the push-out distance and force, without the need for a long time of power-on.
The biggest difference between double-holding electromagnet and single-holding electromagnet is that only one end of the sole-holding electromagnet has retaining force, and the reset needs reverse electrification and spring to achieve reset. After reset, there is no retaining force at all, only spring's rebounding force is still there. As long as a little force is pushed, it will automatically keep in the past at the retaining end. The two-way retaining electromagnet can be maintained at both ends. For example, when the power is turned on and the power is cut off at the left end, it will maintain the stroke and strength, and when the reverse power is turned on, it will extend to the right side to maintain the stroke and strength.
Dongguan De'ang Electromagnetic Technology Co., Ltd. is a company specializing in the field of electromagnetism. It mainly develops and produces various types of electromagnets, solenoid valves, electromagnetic pumps, etc.
Electromagnets are non-standard electronic automatic control components. If there is no product on the website that meets your requirements, you are welcome to call for consultation. Our company's technical engineering will recommend the products most suitable for your company or tailor-made for your company. Welcome you and our company to discuss and research together, make progress together, and look forward to your call.
Dongguan electromagnet manufacturer, De Ang electromagnet
